If you have a deteriorating chimney stack on your property in Southery, here is exactly what the take-down process looks like from the initial assessment through to the finished, weathertight roof.
Call any time. Calls are answered day and night and passed straight to our roofers.
Before any work is planned or priced, someone needs to look at the stack properly. A proper assessment is not just a look from the pavement - it means getting up on the roof and inspecting the stack at close range. From ground level it is easy to miss cracked flaunching, open mortar joints, spalling bricks or lifted flashing. It is also impossible to tell from the ground what condition the roof covering around the base of the stack is in.
During the assessment, the roofer should be looking at: the condition of the brickwork and pointing, the state of the flaunching at the top, the flashing where the stack meets the roof slope, any damage to the tiles immediately surrounding the stack, and - if accessible - a general check of the roof surface nearby. This first look determines whether a take-down is the right call, whether anything else on the roof needs attention at the same time, and what materials will be needed to make good after removal.
It is also at this stage that the roofer should assess the chimney from inside the roof space if access allows. Checking whether the chimney breast below is showing damp, and whether the rafters or purlins near the stack have taken any water damage, helps avoid surprises once the stack comes down and the surrounding area is opened up.
A chimney take-down is not a job that can be done safely from a ladder alone. Chimney stacks sit at height on pitched roofs, and the work involves removing heavy masonry piece by piece. Safe access is needed both for the roofer doing the work and to protect the roof tiles below from falling debris.
On a standard two-storey property, a scaffold tower or a section of tube and fitting scaffold is typical. The exact setup depends on the height of the eaves, the pitch of the roof, and how the stack is positioned. Some roofers use specialist chimney scaffolding that clamps to the stack itself; others use roof ladders combined with scaffolding at eaves level. Either way, the access should be solid enough to allow bricks to be lowered or placed in a skip safely without dropping them onto the roof slope below.
Scaffolding hire is usually factored into the overall job price. If you are getting separate quotes, check whether scaffolding is included or itemised separately - it makes a significant difference to like-for-like comparisons.
The chimney pot is removed first. Depending on its condition, it may come off in one piece or need to be broken up. The flaunching - the sloped mortar collar at the top of the stack - is then removed. This is often loose or crumbling on a neglected stack, but if it is firm it will need to be broken off carefully.
The bricks are then taken down course by course. This is careful, methodical work: bricks are loosened with a bolster chisel and club hammer, then lifted free and stacked or lowered to the scaffold rather than pushed off onto the roof. The aim is to bring the stack down to just below the level of the rafters - typically 150mm or so below the top of the roof slope. This leaves the base of the old stack hidden inside the roof and gives enough depth for the new tiles to be laid over the top without any masonry showing above the roofline.
As the stack comes down, the roofer will also be stripping out the lead flashing from the junction between the stack and the roof covering. The tiles or slates immediately around the stack are carefully lifted and set aside so the make-good can be done properly.
Once the stack is down to the correct level, the top of the remaining masonry is capped off. A course of slates or tiles is laid over the top of the stub, bedded in mortar, to close the top of the old flue. This prevents any rainwater getting into the space where the chimney stack used to be.
New felt and battens are cut and fitted into the area formerly occupied by the stack. This brings the underlay and batten structure up to match the rest of the roof slope. Tiles or slates are then cut to fit and laid to match the existing covering as closely as possible, working up from the bottom of the gap to the ridge.
At the ridge, if any ridge tiles need to be lifted and reset to accommodate the new work, they are re-bedded in mortar and pointed neatly. A dry-fix ridge system can be used here instead of mortar if the customer prefers - it lasts longer and does not shrink or crack.
The finished area should look as continuous with the rest of the roof slope as the available tile match allows. A close match on tile colour and profile is something worth discussing before work starts, particularly on older properties where the existing tiles have weathered significantly.
A full chimney stack produces a substantial volume of waste: dozens of bricks, a pile of old mortar and pointing debris, the chimney pot, and the old lead flashing. This all needs to come off the roof and off your property.
Lead stripped from flashings has scrap value and is typically taken by the roofer. Old bricks are heavy and awkward - they usually go into a skip or are loaded directly into a van for disposal at a licensed tip. The method of disposal should be clear before the job starts so you are not left with a pile of rubble outside your property at the end of the day.
A tidy site at the end of the job means all debris removed, no loose mortar or chippings left on the roof slope, and the scaffold taken down and the area cleared. A final walk-round at completion - ideally with you present - is the point to raise anything that does not look right before the roofers leave.
The chimney breast inside your property is not part of a standard chimney take-down. The external stack is removed; the internal breast, alcoves and any fireplace openings remain as they were. If you want the internal breast removed, that is structural building work requiring its own planning and, in most cases, building regulations approval. Some homeowners choose to do both at the same time; others remove the stack and leave the internal breast as useful alcove space.
If the chimney was the source of damp on the chimney breast, removal of the external stack typically resolves the problem over time as the masonry dries out. If damp persists after the stack is removed, the cause is likely elsewhere and should be investigated separately.
For homeowners in Southery with a stack that needs attention, call Downham Market Roofers to arrange an assessment and get a clear picture of what the job will involve.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.