Urgent leak or storm damage? Call 01366 312325 - answered day and nightUrgent leak? Call 01366 312325
Downham Market Roofing Specialists
01366 312325 Get a Quote →
Flat Roofing

Flat Roofing in Downham Market

Flat roofs need the right materials and proper detailing to stay watertight for years. We work on extensions, garages, outbuildings and commercial buildings across Downham Market and the surrounding villages, using felt and EPDM rubber systems suited to the local conditions.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01366 312325
What's involved

How we handle flat roofing

Flat Roofing in Downham Market

Flat roofs are common in this area - on rear extensions, garages, outbuildings, bay window tops and single-storey commercial buildings. When a flat roof fails, it usually does so quietly: a small blister or split in the membrane lets water in, and by the time damp appears on a ceiling the damage inside can already be significant. Getting the right repair or replacement done properly matters.

We carry out flat roofing work across Downham Market and the surrounding area.

Felt and EPDM: the Two Systems We Use

Most flat roofs in this part of Norfolk are covered in one of two ways: traditional built-up felt or EPDM rubber membrane. Each has its place, and the right choice depends on the size of the roof, the structure beneath it, and the budget available.

Built-up felt uses two or three layers of bitumen-based felt, torched or bonded together, with a mineral-finish cap sheet on top. It is a proven system for smaller roofs and is straightforward to repair. A well-laid felt roof on a sound deck can last fifteen to twenty years before it needs replacing.

EPDM rubber is a single-ply synthetic membrane that is glued or mechanically fixed to the deck. It is highly resistant to frost and UV degradation, stays flexible in cold weather, and manufacturers typically quote a lifespan of fifty years for the material itself - though how long any roof lasts in practice depends on how well it is installed and how well the deck beneath it is maintained.

We will tell you honestly which system suits your roof before any work starts. A small garage roof and a large flat-roofed extension are different jobs with different considerations.

What a Flat Roof Replacement Actually Involves

A common mistake is to lay new felt directly over old felt to save time. This traps moisture against the deck and accelerates rot. A proper flat roof replacement starts by stripping all existing material back to the structural deck, inspecting every board for soft spots, rot or movement, and replacing any damaged sections before the new membrane goes on.

The deck must be clean, dry, and flat. Any penetrations - soil pipes, rooflights, upstands against walls - need careful detailing with compatible flashings or trims. These junctions are where the majority of flat roof leaks begin. Getting them right the first time is what separates a flat roof that performs from one that gives problems within a few years.

Key stages of a flat roof replacement include:

  • Stripping the existing covering and disposing of waste
  • Checking and replacing any rotten or damaged decking boards
  • Ensuring adequate falls so water drains to the outlet rather than pooling
  • Applying the new membrane with correct detailing at all edges and upstands
  • Fitting or refitting lead or aluminium flashings at abutments with walls
  • Checking outlets and gutters are clear and properly connected

Repairs Rather Than Full Replacement

Not every flat roof needs to come off. If the deck is sound and the covering is in reasonable condition apart from a localised split, blister or failed flashing, a targeted repair is often the right answer. We will inspect the roof and give you an honest assessment of whether repair is viable or whether patching would only delay an inevitable replacement.

A common problem on older felt roofs is that blisters form where moisture has been trapped during the original installation. Small blisters can be cut back, dried out and sealed. If blistering is widespread, it usually means the felt has reached the end of its serviceable life and replacement is the more cost-effective route.

Flat Roofing Costs in Downham Market

Flat roof replacement in Downham Market typically costs in the range of £70 to £120 per square metre for a felt system, and £80 to £140 per square metre for EPDM, depending on the condition of the existing deck and the complexity of detailing required. A standard single-garage flat roof (roughly 15 to 20 square metres) therefore falls in the broad range of £1,200 to £2,500 for a full replacement, though this varies with access, waste removal and any deck repairs needed.

These are indicative figures based on typical current UK rates. We will price your specific job after seeing the roof, not before.

Properties and Conditions in This Part of Norfolk

Properties in this part of Norfolk can be exposed to persistent wind and driving rain in autumn and winter. Flat roofs with inadequate falls or poorly sealed edges take the brunt of this. Standing water - even shallow pooling - accelerates felt degradation and puts stress on seams and joints.

Frost is a factor too. Water that finds its way under a failing membrane can freeze, forcing joints open further. Catching a flat roof problem in late summer or early autumn, before the worst of the weather arrives, is almost always cheaper than dealing with the consequences after a wet winter.

Call Us for a Flat Roof Survey

If your flat roof is showing signs of age, has started leaking, or you simply want to know what condition it is in before problems develop, call us to arrange a survey. We cover Downham Market and the surrounding villages and will give you a straight assessment of what the roof needs.

Itemised quote
Materials, labour, scaffold broken out
Fixed start date
With a daily schedule

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01366 312325
Questions

What people ask first.

For a standard semi-detached house, most customers budget between £5,000 and £9,000 for the roofing work itself using concrete interlocking tiles, excluding scaffolding hire. A larger or more complex property with hips, a chimney or valleys will cost more, and natural slate adds to the material cost. The only reliable way to get an accurate figure is a survey of your specific roof.
A typical three-bedroom semi-detached house in the Downham Market area costs in the region of £5,500 to £10,000 for a full replacement, including scaffolding and waste removal. Larger properties, complex roof shapes, or roofs needing structural timber repairs will cost more. These figures are a guide only - the actual price depends on what is found when the roof is inspected properly.
A straightforward patch repair on a small area of felt flat roof typically costs £150-£350. If the decking boards beneath the felt are damaged and need replacing, the cost rises to £400-£800 for a small section. A full re-felt on an average garage roof generally falls between £800 and £1,500 depending on the size, the condition of the boards and the number of old felt layers to strip. These are typical ranges - an accurate price needs an inspection.
A felt flat roof replacement typically costs £70 to £120 per square metre, while EPDM rubber runs from around £80 to £140 per square metre. A standard garage flat roof of 15 to 20 square metres usually falls somewhere between £1,200 and £2,500 all in, depending on how much deck repair is needed and how complex the edge detailing is. These are indicative figures - the only reliable price is one based on seeing your actual roof.
On a standard semi-detached house in Downham Market, a full roofline replacement in uPVC typically costs between £800 and £1,800. The final price depends on how many metres of board need replacing, whether any rafter feet are rotten and need repairing first, and the number of storeys. A detached property with more linear metres of roofline will usually sit towards the top of that range or above it.
A chimney flashing replacement including new lead, re-pointing and scaffolding typically costs between £400 and £900 for a standard stack, depending on size and complexity. Larger or ornate chimney stacks with decorative corbelling cost more because dressing lead around complex profiles takes additional time. Every job needs an inspection before a firm price can be given, so call us to arrange a survey.
For a standard single stack on a two-storey property, expect to pay somewhere between £1,200 and £3,500. The main variables are how high the stack is, how far down it needs to be rebuilt, whether the flashing requires replacement, and the cost of scaffolding. A multi-flue stack or one on a tall building will cost more. We can only give an accurate figure once we have inspected the chimney directly.
For a standard two-storey property, expect to budget roughly £800 to £2,000 including scaffold hire. The final cost depends on the height and size of the stack, the roof pitch, and how much tile matching is needed. Larger or multi-flue chimneys on taller properties will sit at the higher end or beyond that range.
Other services

More from Downham Market Roofers