Downham Market Roofers provides commercial roofing to warehouses, farm buildings, retail premises and offices in and around Stoke Ferry.
Call any time. Calls are answered day and night and passed straight to our roofers.
Commercial roofing covers a wide range of building types and demands that domestic work simply does not. A warehouse roof with 800 square metres of profiled steel sheeting has nothing in common with a terraced house, and the decisions you make at specification stage will determine how much maintenance you face and how long before the roof needs replacing. Getting those decisions right at the start saves money over the life of the building.
We work on warehouses, agricultural and farm units, retail buildings, workshops and office premises across Stoke Ferry and the surrounding area, including Downham Market, Swaffham, March, Wisbech, King's Lynn and Ely. Each building type has its own demands, and each roofing system has genuine strengths and genuine weaknesses. This page sets out your main options honestly so you can make an informed choice before any work begins.
Most commercial roofs fall into one of three broad categories: profiled metal sheeting, single-ply membrane, and built-up felt. There are variants within each, and each suits different situations. Below is an honest summary of each.
Profiled steel or aluminium sheeting is the most common system on large agricultural, industrial and warehouse buildings. It is fast to install over large areas, relatively affordable per square metre and extremely durable when the specification is right. Steel sheets are typically supplied with a polyester or plastisol factory coating, and a good-quality coating can remain maintenance-free for 20-25 years before repainting or over-cladding is needed.
The main variants are steel (cheaper, heavier, suitable for most spans) and aluminium (lighter, naturally corrosion-resistant, more expensive). Thickness matters: agricultural and light industrial buildings typically use 0.5-0.7 mm steel, while heavier-duty industrial applications may go to 0.7 mm or above. The profile shape affects both the aesthetic and the drainage characteristics, so it is worth discussing the options before committing.
Single-ply membranes - most commonly EPDM rubber, TPO or PVC - are now widely used on flat and very low-pitch commercial roofs. A single-ply system uses one layer of membrane, either mechanically fixed, bonded or ballasted, across the roof deck. It is the system of choice for many modern commercial flat roofs because it is light, flexible and relatively quick to install.
EPDM (ethylene propylene diene monomer) is a synthetic rubber membrane that has been in use for decades on commercial buildings in the UK and Europe. A correctly installed EPDM roof on a sound deck can realistically last 30-40 years with minimal maintenance. TPO and PVC membranes are thermoplastic options that can be hot-air welded at seams, which eliminates the adhesive joints that are a common failure point in older systems.
Built-up felt (also called multi-layer felt or torch-on felt) has been used on commercial buildings for generations. It involves laying multiple layers of bitumen-based felt, usually two or three, bonded together with heat or adhesive. The top layer is typically a mineral-finish cap sheet that provides UV protection.
On commercial buildings, a three-layer torch-on system is standard. A single layer of felt on a commercial roof is inadequate and is a false economy that will fail within a few years. Felt roofing is often the right choice for smaller flat roof areas on commercial buildings - for example, a flat-roofed extension on a retail premises or an office building - where cost and simplicity are the priority.
Not all commercial roofs are flat. Many farm buildings, older retail premises and offices have pitched roofs covered in slate, clay or concrete tiles, or in some cases natural Welsh or Spanish slate. Pitched roofing on commercial buildings is maintained and repaired in much the same way as on domestic properties, but access requirements are more demanding and the scale of the work is typically larger.
Replacing a pitched commercial roof in slate is one of the more expensive options available, but natural slate can last 80-100 years when properly laid on sound timber and with correct detailing at ridges, verges, valleys and flashings. For a long-term owner of a commercial building, the case for natural slate is stronger than for a tenant on a short lease. Concrete interlocking tiles offer a lower upfront cost - typically £50-£80 per square metre installed for a straightforward commercial roof - but their service life is shorter and their weight is greater than natural slate.
Repairs on commercial roofs fall into two broad types: localised repairs to identified failure points, and more extensive remedial work where a roof is approaching the end of its life but full replacement is not yet justified. Common failure points on commercial roofs include:
A repair should always address the cause, not just the symptom. Patching a blister in felt when the underlying problem is a blocked outlet will result in the same failure appearing nearby within months. Before committing to a repair on an older commercial roof, it is worth having a proper inspection to establish whether repair or replacement makes better financial sense.
A commercial roof inspection should cover the roof surface, all upstands and flashings, gutters, outlets and downpipes, rooflights, penetrations for services, and the internal soffit or underside where accessible. Photographs should be taken throughout so that you have a clear record of condition at a point in time.
For larger commercial roofs or those approaching replacement, a more detailed survey including a core sample of the existing build-up can help establish what is actually there before specifying new work. This matters because it is common on older roofs to find that previous patches or overlays have changed the original specification, and these layers affect the thermal performance and the options for any new system.
How often a commercial roof should be inspected depends on its age, system and the history of maintenance, but a general guide is to inspect at least every two years on roofs over ten years old, and annually on any roof showing signs of deterioration or past repairs.
This is the question that matters most when a commercial roof is causing problems. A useful starting point is to compare the cost of repair against the likely remaining life of the roof if repaired. If a repair costs 30-40% of a full replacement and buys only three or four years of reliable service, replacement is usually the better investment. If a relatively minor repair - say, re-sealing a flashing or replacing a small area of failed felt - restores a roof with ten or more years of serviceable life remaining, repair makes clear sense.
The condition of the substrate or deck matters too. A new membrane on a rotten or wet deck will fail quickly. If decking boards, insulation boards or metal liner trays are damaged, the cost of addressing them properly must be included in any realistic repair estimate.
Before agreeing to any commercial roofing work, ask the contractor the following:
A contractor who cannot give clear answers to these questions before starting work is not one you should be handing a large commercial job to.
Prices vary depending on the system, the size of the roof, access requirements and the condition of the existing structure. As a general guide for the UK market:
These figures are for guidance only. Access difficulties, asbestos removal (common on older agricultural and industrial buildings), structural repairs and the cost of scaffolding or mobile elevated work platforms will all affect the final price. Always get a written breakdown that separates materials, labour, access and disposal so you can compare quotes meaningfully.
If you have a commercial building in Stoke Ferry, Downham Market, Swaffham, King's Lynn, Wisbech, March, Ely or the surrounding area and you need an honest assessment of what your roof needs, call us to arrange a roof survey. We will tell you what the roof is doing, what it is likely to do in the next few years, and what your options are - with the pros and cons of each laid out plainly so you can make the right call for your business.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.