Downham Market Roofers carries out commercial roofing work across Wisbech and the surrounding area, covering everything from warehouse roofs and farm buildings to retail units and offices.
Call any time. Calls are answered day and night and passed straight to our roofers.
Commercial roofing is a different discipline from domestic work. The roof spans are larger, the loading requirements are different, the drainage systems are more complex, and the cost of getting it wrong falls on a business rather than a household.
The buildings we work on include agricultural units, warehouses, distribution sheds, small industrial units, retail premises, and offices. Each type has its own demands, and the right roofing system for a chilled storage warehouse is not the same as the right system for a brick-built office block.
A commercial roof project begins with a proper survey of the existing structure. Before any material is specified, we need to understand the deck type (steel, timber or concrete), the current falls, the drainage positions, any existing insulation, and what the building is used for. A roof that cannot drain properly will fail regardless of the membrane quality.
For flat and low-pitch commercial roofs, the two systems we specify most often are single-ply membrane and EPDM rubber. Single-ply is a factory-manufactured sheet, typically 1.2 mm thick, that is either mechanically fixed, adhered or ballasted depending on the substrate. It handles large roof areas efficiently and is thermally weldable at the seams, which eliminates the weak points that cause most flat roof failures. EPDM rubber is better suited to smaller commercial roofs and outbuildings; it is a single-piece sheet on smaller areas, so seams are reduced further.
For pitched commercial roofs, profiled metal sheeting is the standard choice on agricultural and industrial buildings. Box profile and standing seam systems are both available. Slate is appropriate for commercial buildings in conservation settings or where planning requires a traditional appearance. Felt and mineral-surface cap sheet systems are used on lower-pitch sections and extensions.
Repairs are a significant part of commercial roofing. Common problems on flat commercial roofs include lap failures on old built-up felt systems, split or lifted single-ply membranes, failed flashings around plant penetrations and rooflights, blocked or crushed gutters, and condensation damage from inadequate insulation. On profiled metal roofs, fastener corrosion and end-lap seal failure are the most frequent causes of leaks.
A commercial roof repair is only worth doing if the deck beneath is sound. Applying new membrane over a rotted or deflecting deck is a short-term fix that delays the inevitable. Part of our job is to tell you honestly whether a repair will hold or whether the section needs replacing.
Typical commercial roof repair costs in the UK range from around £300-£800 for a small localised repair to £2,000-£8,000 or more for a section replacement on a large industrial roof. The figure depends heavily on access requirements, roof size, and the extent of deck damage found once the old material is lifted.
When a roof is beyond economic repair, a full replacement is the better investment. Signs that a commercial roof has reached that point include repeated leak calls despite repairs, widespread membrane cracking or crazing, significant deflection in the deck, and insulation that is saturated and compacted. A thermographic survey can confirm insulation performance before you commit to a full replacement.
New commercial roof costs in the UK typically fall between £70-£150 per square metre for a single-ply membrane system, including insulation upgrading. Profiled metal re-roofing on an agricultural or industrial building is typically £25-£60 per square metre for the sheet and fixing labour, depending on profile type and existing structure. Slate on a commercial pitched roof runs from around £90-£160 per square metre installed, depending on slate grade and roof complexity. These are indicative ranges; every building is different and a proper survey is needed before any figure is meaningful.
When specifying a replacement, insulation thickness matters. Building Regulations Part L sets minimum U-value requirements for commercial roofs, and a re-roof is the practical moment to meet or exceed that standard. A better-insulated roof costs more upfront but reduces heating bills throughout its life.
Pitched roofs on commercial premises carry several advantages. They shed rainwater and debris more quickly than flat or low-pitch designs, they tend to have a longer service life, and they allow roof space that can be used for storage or services. Planning authorities often prefer pitched roofs on commercial buildings that are visible from the street.
The benefits of pitched roofing on commercial buildings include lower maintenance frequency, better weather shedding, and longer intervals between full replacements when built properly. The main cost consideration is that pitched roofing is more labour-intensive than flat roofing over the same floor area, because of the slope, the ridge and hip details, and the scaffolding requirements. A pitched commercial roof in slate or concrete tile typically costs more per square metre than a flat single-ply system, but it may outlast two or three flat roof replacements over the same period.
Torch-on felt, properly specified as a built-up felt system, is still a valid choice for smaller commercial roofs and flat-roof extensions on retail and office premises. A quality three-layer built-up felt system uses a base layer, an intermediate layer, and a mineral-surface cap sheet, each layer bonded with bitumen. When installed correctly on a sound deck with proper falls, a built-up felt roof has a realistic service life of 15-25 years.
The benefits of felt roofing on commercial buildings are its lower upfront cost compared to single-ply, the wide availability of experienced installers, and its suitability for complex shapes and multiple penetrations. Costs for a quality built-up felt system on a commercial roof typically run from around £40-£80 per square metre installed, depending on deck condition and access. The trade-off is that felt is more susceptible to damage from foot traffic and pooling water than a mechanically fixed single-ply system.
Natural slate remains the material of choice for commercial buildings where appearance matters, including shops, offices, hotels, and buildings in conservation areas. Welsh slate is the benchmark for quality and longevity; a well-laid Welsh slate roof can last 80-100 years with only minor maintenance. Spanish and Chinese slates are available at lower cost but vary considerably in quality and density.
The benefits of slate on a commercial building are longevity, low maintenance frequency, a fire-resistant surface, and an appearance that requires no planning justification in most settings. The main consideration is cost and weight: slate is heavier than concrete tile or metal sheeting, and the roof structure must be capable of carrying it. How long a slate roof takes to install depends on the size and complexity of the roof; a straightforward pitched commercial roof of 150 square metres would typically take a small team around 5-10 working days, weather permitting.
Commercial property owners and managers should have roofs inspected at least every two years, and after any significant storm event. A visual inspection from roof level is not the same as a survey; a proper inspection checks flashings, upstands, outlets, rooflights, penetrations and the membrane or surface condition in detail, and produces a written record of findings and recommended actions. This record is useful for insurance purposes, lease renewals, and budgeting for future maintenance.
For larger or more complex commercial roofs, a core sample can confirm the number of existing felt layers and the condition of insulation without lifting the whole roof. A thermographic survey, carried out on a clear cold night after a dry day, shows wet or damaged insulation as warm patches and allows targeted repairs rather than wholesale replacement.
Regular maintenance extends the life of any commercial roof. The essentials are: keep outlets and gutters clear of debris, particularly in autumn; check that expansion joints have not split or lifted; look for blistering or splitting on flat membrane surfaces after hot weather; check flashing edges and upstands after high winds; and ensure any roof-mounted plant is not vibrating in a way that works flashings loose. A blocked outlet on a large flat roof can allow enough water to pond to overload the structure.
On profiled metal roofs, check fasteners annually and replace any that show signs of corrosion before water tracks down the fixing hole into the building. End-lap seals on metal sheeting dry out over time and should be inspected every few years.
This is the question that commercial property owners and managers face most often. A repair makes sense when the damage is localised, the deck is sound, the rest of the membrane or surface is in reasonable condition, and the roof is less than halfway through its expected service life. A replacement makes sense when repairs have become recurring, when the insulation is saturated, when the deck is compromised, or when the roof is approaching the end of its realistic life.
The honest answer is that a repair costs less today but a replacement costs less over five years if the roof is genuinely failing. Ask for a clear condition assessment, not just a quote for the work you called about. A good roofer will tell you if a repair is unlikely to hold.
When a commercial roof develops a leak or visible damage, there is often a gap between the problem appearing and a roofer being able to attend. What you do in that gap can limit further damage or make it significantly worse. This section covers the practical steps that business owners and site managers can take safely, and the things that should be left to a professional.
When we arrive to assess a commercial roof in Wisbech or the surrounding area, it helps if you can tell us when the leak first appeared, whether it happens in all rain or only in heavy or wind-driven rain, whether any work has been done on the roof recently, and whether the building has had any changes to its plant or services that required roof penetrations. These details narrow down the source significantly.
Ask the roofer to explain what they have found, not just what they propose to do. Ask whether the deck is sound. Ask how long a repair is likely to hold given the overall condition of the roof. Ask what the signs would be that the roof needs replacing rather than repairing. A straightforward answer to each of these questions is what you should expect.
If you manage a commercial or industrial property and have a roof that is causing concern, call us to arrange a proper inspection. We will assess the structure, identify the source of any problems, and give you an honest account of your options before any work is quoted or agreed.
Call Downham Market Roofers to book a commercial roof survey for your Wisbech property.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.