Downham Market Roofers installs exterior cladding for homeowners in Kings Lynn and explains exactly what to do afterwards to keep it performing well for as long as possible.
Call any time. Calls are answered day and night and passed straight to our roofers.
Exterior cladding is a system of boards fixed to the outer face of a wall over a ventilated batten framework. The ventilated cavity behind the boards is important: it allows moisture to escape rather than building up against the wall structure. Done correctly, cladding improves weatherproofing, adds a degree of thermal insulation, and gives a property a clean, consistent appearance.
We work with three main materials: timber, composite boards, and fibre cement. Timber is the most traditional choice and can be painted or stained. Composite boards combine wood fibre with a plastic binder to produce a board that resists moisture without frequent maintenance. Fibre cement is the most stable and durable of the three, resistant to damp, frost, and insect damage.
Cladding is not a fit-and-forget installation. The boards themselves may be durable, but the finishes, sealants, and trims that make the system watertight need occasional attention to keep performing. Neglecting maintenance for several years does not usually cause a catastrophic failure all at once. Instead, it causes a slow deterioration that is much more expensive to put right than a simple annual check would have been.
The good news is that the maintenance most cladding needs is straightforward and, for the most part, something a homeowner can do themselves. The sections below cover what to check, how often, and when to call a contractor.
Once a year, work around the outside of the building and look at the cladding from ground level. You are looking for:
None of these problems is an emergency if caught early. All of them become expensive if left for several seasons.
Cladding benefits from a wash down every one to two years. A garden hose or a low-pressure washer on a gentle setting is fine for most boards. High-pressure washing can force water behind the boards if the jet is aimed upward into the horizontal gaps between courses, so always direct the jet downward or across the face of the boards, never upward into the laps.
For green algae or mould, a dilute solution of a proprietary exterior biocide applied with a soft brush and then rinsed off is effective. Do not use bleach-based household cleaners on painted cladding: they can strip the paint film and leave the board exposed.
Timber cladding that has a clear oil or stain finish will benefit from a fresh coat every four to six years, or when the finish starts to look grey and dry rather than richly coloured. Painted timber needs repainting when the paint film shows cracking or peeling. Never paint over a cracked film without removing the loose material first: the new paint will lift away from the edges of the old cracks within a season.
Exterior sealant around windows, doors, and corner trims typically lasts seven to fifteen years before it starts to crack, shrink, or lose adhesion. Checking and renewing sealant is one of the highest-value maintenance tasks on any clad property because failing sealant lets water run directly behind the boards at a joint.
When renewing sealant, the old material needs to be fully removed and the surface cleaned and dried before the new product goes in. Applying new sealant over old does not work: it will not bond properly and will fail faster than a clean application. Use an exterior-grade flexible sealant that is compatible with the cladding material.
Homeowners can safely clean cladding, renew accessible sealant at ground level, and paint or stain boards from a stable ladder or a low scaffold tower. There are situations, though, where a contractor is the right call:
If your current cladding has reached the end of its useful life, or if you are considering cladding a wall that is currently bare or rendered, we can advise on the best material for your property and budget. Fibre cement and composite boards are popular choices where low maintenance is a priority. Timber suits properties where a more traditional finish is wanted.
Exterior cladding on a typical semi-detached elevation costs broadly between £3,000 and £8,000 depending on the material, the size of the elevation, and the access needed. Fibre cement and composite boards sit toward the higher end of that range.
If you have cladding on your property in Kings Lynn that needs a maintenance check, a repair, or a full replacement, call Downham Market Roofers for a site visit and a clear quote. We will look at what you have, tell you honestly what it needs, and give you straightforward advice on the options.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.