Urgent leak or storm damage? Call 01366 312325 - answered day and nightUrgent leak? Call 01366 312325
Downham Market Roofing Specialists
01366 312325 Get a Quote →

Exterior Cladding in Wisbech - What to Do While You Wait for a Contractor

Downham Market Roofers provides exterior cladding installation and replacement in Wisbech, and this page explains what homeowners can safely do while they wait for a contractor and what to leave well alone.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01366 312325
Exterior Cladding · Wisbech

Expert Exterior Cladding
in Wisbech

What Exterior Cladding Is

Exterior cladding is a system of boards fixed to the outer walls of a property over a ventilated batten framework. It keeps rain off the wall surface, reduces heat loss, and can significantly improve the appearance of a property. We install timber, composite, and fibre cement boards, choosing the material to suit the building, the exposure, and the homeowner's budget.

A correctly installed cladding system has a ventilated cavity behind the boards, so that any moisture that gets past the face of the boards can drain away rather than sitting against the wall structure. This cavity is what separates a properly built system from boards stuck directly to a wall, which will eventually cause damp problems regardless of how well the boards themselves are performing.

When Cladding Goes Wrong - Common Problems

Cladding problems tend to develop gradually. A board splits at a fixing point, a trim pulls away from a corner, or sealant around a window frame cracks and lets water in. None of these starts as an emergency, but all of them allow water to track behind the boards if left unattended through wet weather.

More serious failures include boards that have lost their fixings and are moving in the wind, sections where the battens behind the boards have rotted and are no longer holding the boards securely, and cases where water has been getting behind the system long enough to cause damp in the wall structure itself.

When a cladding problem shows up, there is usually a gap between noticing it and getting a contractor on site. Knowing what to do in that gap, and knowing what not to touch, makes a real difference to both the cost of the repair and the safety of the building.

What You Can Safely Do While You Wait

There is a reasonable amount a homeowner can do to prevent a cladding problem from getting worse while a contractor is arranged:

  • Document the damage with photographs. Take photos from ground level and, if it is safe to do so, from a ladder. Date the photos. This is useful for your own records and helps the contractor understand the scope of the problem before they arrive.
  • Block any obvious opening with a temporary cover. If a board has blown off entirely and left a gap, a piece of polythene sheet or a tarpaulin fixed over the gap with battens or bricks will stop rain driving in while you wait. Use fixings that go into the battens, not the wall surface if you can help it.
  • Clear debris from the base of the cladding. Leaves, soil, and vegetation banked up against the bottom of the cladding hold moisture against the boards and the lowest batten. Clearing it away takes five minutes and reduces the rate at which the bottom course deteriorates.
  • Check whether any internal walls adjacent to the affected area feel damp to the touch. If they do, keep an eye on it and mention it to the contractor. It helps them prioritise where to investigate first.
  • Note when the problem appeared or worsened. If a board came loose after a storm, or if you noticed a gap after a prolonged spell of wet weather, that context helps the contractor pinpoint the cause more quickly.

What Not to Do Yourself

There are tasks that look straightforward but can make the situation worse or create a safety risk. These are worth being clear about:

  • Do not attempt to re-fix loose boards at height. A board that has partially come away from a wall above ground-floor level needs proper access equipment to fix safely. Working from a leaning ladder on an unstable surface is a significant fall risk, and driving new fixings into a batten that may already be rotting does nothing to secure the board.
  • Do not apply expanding foam or silicone into gaps behind loose boards. It is tempting to seal gaps with whatever is to hand, but foam and silicone in the wrong place can trap moisture behind the boards rather than stopping it getting in, and can make a proper repair more difficult.
  • Do not pull a board away from the wall to inspect what is behind it unless you are confident you can put it back securely. Removing a board without the right fixings to hand, at height, in wet weather, creates a larger problem than the one you started with.
  • Do not paint over cracked or bubbling paint on boards as a quick fix. Paint that is failing has usually lost adhesion to the board surface, and applying a new coat over it will not bond. The new paint will lift within weeks, and you will have wasted material without protecting the board.
  • Do not pressure-wash damaged boards. If a board is already cracked or split, pressure washing can force water directly into the crack and behind the board. Wait until the board has been assessed and repaired or replaced.

Keeping Yourself and Others Safe

If a board is loose enough to move in the wind, it is a falling hazard. Keep people and vehicles away from the area below it until a contractor can secure it. If the board is on an elevation over a path or a public pavement, consider whether temporary barriers are needed.

Do not attempt to pull a loose board fully free from height. The weight of a full-length cladding board is awkward to manage on a ladder, and a board falling from first-floor height or above can cause serious injury.

What the Repair or Replacement Work Involves

When a contractor arrives to assess the cladding, the first step is to check what is behind the boards in the affected area. This usually means removing one or two boards to inspect the battens and the wall surface beneath. The condition of the battens determines whether a board-only replacement is sufficient or whether the batten framework needs attention first.

Individual board replacement on a single elevation typically costs between £300 and £800 for a small section, depending on the material and the access required. Full replacement of cladding on a typical home costs broadly between £3,000 and £8,000 depending on the size of the elevation, the material chosen, and the condition of the substrate. Fibre cement and composite boards cost more than basic timber but need less maintenance over their lifetime.

Choosing a Material When the Time Comes

If you are replacing a significant area of cladding, the choice of material is worth thinking through before the contractor arrives. Timber is traditional and paintable but needs regular maintenance. Composite boards resist moisture well and need less redecoration. Fibre cement is the most stable option, particularly on elevations that take a lot of weather, and it holds paint well without warping or shrinking.

A contractor should be able to show you samples and explain the practical differences. If you have a preference, mention it when you first make contact so that the contractor can bring relevant samples to the site visit.

Get in Touch for a Site Visit in Wisbech

If you have a cladding problem at your property in Wisbech, call Downham Market Roofers to arrange a site visit. We will assess what the cladding needs, give you a clear written quote, and advise on the best material and approach for your property.

Why choose Downham Market Roofers?

  • Free survey and itemised quote
  • Fixed price - no surprises
  • Local team

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01366 312325