If you want to understand exactly what happens when a roofline is replaced in Southery - from the first look at the job to the moment the van pulls away - this page walks through the process in full.
Call any time. Calls are answered day and night and passed straight to our roofers.
Fascias, soffits and guttering are interdependent. The soffit sits behind the fascia. The gutter brackets fix to the fascia. The downpipes connect to the guttering. Strip them out in the wrong order and you create unnecessary risk and extra work. A methodical approach, done in the right sequence, also means nothing gets missed - particularly the structural checks that determine whether the job is a straightforward swap-out or whether there are hidden problems to deal with.
The sequence below describes how a proper roofline replacement should be carried out on a standard domestic property. The detail will vary slightly with the size of the house and the access method used, but the principles apply to most homes in Southery and the surrounding area.
A roofline job should not be priced from the pavement. The first step is a proper inspection, usually from a ladder or a section of scaffold, to see the condition of what is currently in place.
At this stage, a roofer is looking at:
The assessment informs the quote. Any pricing given without this inspection will almost certainly need revising once the job begins and the boards are stripped back. Ask directly whether the inspection covers the rafter feet - not all contractors include this as standard.
Safe access is a requirement, not an optional extra. For a standard two-storey house, a scaffold tower or section of tube-and-fitting scaffold along the affected elevation is the norm. Some contractors use a combination of ladder and stand-off bracket for shorter runs, but scaffold gives a stable platform for extended work and allows materials to be staged at height safely.
The access method affects the cost of the job and the time it takes. A full house on scaffold will take longer to set up and strike than a single elevation on a tower. This should be factored into the quote you receive, not added as a surprise at the end.
The existing guttering comes off first, followed by the gutter brackets, then the soffit boards and finally the fascia boards. Where bargeboards are also being replaced, they are removed at this point too.
Stripping everything back exposes the rafter feet and the top of the external wall. This is the critical stage where the real condition of the structure becomes clear. Common findings at this point include:
Any rot in the rafter feet needs to be addressed before new boards go on. The options are splicing in a new section of timber (a rafter foot repair), treating affected areas with a preservative hardener where the rot is surface-level, or in more severe cases, replacing the full rafter tail. Boarding over rotten timbers without treating them will result in the same problem recurring.
Once the structure is checked and any remedial timber work is done, the surface is prepared for the new boards. This means making sure the fixing surface is sound, cleaning away any debris or old sealant, and checking that the rafter foot profile suits the fascia board being fitted.
Where uPVC fascia is going onto a property that previously had timber, a backing board or a cavity closer is sometimes used to achieve the right depth and to close any gap between the board and the wall.
Fascia boards are fixed directly to the rafter feet. For uPVC boards, fixings are typically stainless steel screws to resist corrosion, and expansion gaps are left at all joints to allow for thermal movement. Skipping the expansion gap is a common installation mistake - it causes the board to buckle in warm weather as the uPVC expands.
Corners and stop-ends are made with purpose-made trim pieces. A well-fitted fascia sits tight against the rafter feet along its full length with no gaps that would let water behind it.
The soffit spans from the fascia back to the wall. It is typically slid into a channel at the back of the fascia board and pinned or clipped to a bearer fixed to the wall. Where the run is long, mid-span support prevents the soffit from bowing.
Ventilation is fitted as part of this stage. Ventilated soffit panels have a perforated or slotted strip, or individual circular vents can be cut in at regular intervals. Current building practice requires a continuous equivalent gap of at least 25mm along the eaves. Losing this ventilation causes condensation to build up in the roof space, which leads to damp insulation and timber decay over time. A good installer will confirm what ventilation is being provided as a matter of course.
New gutter brackets are fixed to the fascia at the correct spacing - typically every 600mm for uPVC guttering. The fall of the gutter toward the downpipe is set at this point, usually between 1:350 and 1:600 (roughly 3mm per metre run). Too little fall and water sits in the gutter and breeds moss; too much and the gutter empties too fast and splashes at the outlet.
Gutter sections are clipped together, and the joints are checked to ensure the rubber gasket is seated properly and the connection is watertight. The downpipe is fitted with any required offsets to bring it from the outlet position on the gutter to the wall face, and then clipped to the wall down to the drain connection or shoe at the bottom.
Before the scaffold comes down, the finished roofline should be checked for alignment, joint sealing and gutter fall. Pouring a bucket of water into the highest point of the gutter run and watching it travel to the downpipe is a straightforward way to confirm the fall is correct and the joints are sound. Any leaks found at this stage are fixed before access is removed.
The old fascia boards, soffit panels, guttering and fixings all need to go. A tidy site at the end of the job is a reasonable expectation. Rotting timber especially should be bagged and removed rather than left in the garden.
We carry out fascia, soffit and guttering replacements in Southery and the surrounding area, including Downham Market and nearby villages. If you want a straight conversation about the condition of your roofline and what a proper replacement would involve for your specific house, call us to arrange a visit.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.