If you need a new roof fitted in Christchurch, knowing how to pick the right contractor could save you thousands of pounds and a great deal of stress.
Call any time. Calls are answered day and night and passed straight to our roofers.
A full new roof is one of the largest investments you will make in your home. Whether you are replacing a failed roof on an existing property or covering a new build, the work covers stripping the old structure back, checking or replacing the timber deck and rafters, laying new felt or membrane, battening out and then fixing the chosen tile or slate. On flat sections, the system used - typically torch-on felt or EPDM rubber - must be correctly detailed at edges and outlets to drain properly.
The materials specified at the start of the job determine how the roof performs for the next thirty or forty years. Cheap concrete tiles laid without adequate ventilation, or ridge work pointed in hard cement rather than bedded in mortar and capped with dry-fix clips, will cause problems long before the roof should need attention. Getting the specification right before work begins is as important as the installation itself.
The roofing trade has no legal requirement for formal licensing, which means the range of quality between contractors is wide. A price that looks attractive can quickly become expensive if the underlying work is poor. A new roof should last several decades; a bad one can fail within a few years and leave you with water damage that costs far more to put right than you saved on the original job.
In and around Christchurch, the buildings vary from older brick cottages to modern detached houses. Each type has different structural requirements, different tile profiles that suit the roof pitch, and different detailing around chimneys, dormers and valleys. A contractor who has worked across this range of property types will approach your job differently from one who only fits one system on new-build estates.
Before you sign anything or hand over a deposit, ask every contractor the following. Their answers - and the confidence with which they give them - will tell you a great deal.
A properly written quote should describe the scope of work clearly. It should name the tile or slate product, the underlay specification, how the ridge will be finished, whether any timber is included in the price and what happens if additional rot or damage is found once the old roof is stripped. If rot or structural damage is discovered mid-job, the cost will increase - a transparent contractor will explain this in advance and agree a day rate or allowance for additional timber rather than presenting a surprise invoice.
Check whether scaffolding is included. A safe working platform is not optional on a two-storey roof, and if it is not in the quote, the job cannot legally or safely proceed without it being added. If one quote includes scaffolding and another does not, they are not comparing the same thing.
Certain patterns are worth treating with real caution. A contractor who knocks on your door unsolicited and claims to have spotted a problem while working nearby, one who cannot show you previous work on similar properties, or one who pressures you to decide on the same day are all situations where slowing down is sensible.
In the areas around Christchurch, word of mouth still carries weight. Asking neighbours who has worked on their roofs recently, and going to see finished jobs before committing, remains one of the most reliable ways to find a contractor whose work holds up.
For a pitched roof, the main choices are concrete interlocking tiles, plain clay tiles, and natural or fibre-cement slate. Concrete interlocking tiles are the most common on post-war housing because they go on quickly and cover large areas efficiently. Plain clay tiles and natural slate are heavier, require closer batten spacings and a steeper pitch to work properly, but they tend to suit older property styles and last longer before needing replacement. Fibre-cement slate is lighter than natural slate and a practical option where the roof structure cannot take the additional load.
On flat or shallow-pitch sections - such as a garage roof, a flat kitchen extension or a porch - the two most widely used systems are torch-on felt (also called built-up felt) and EPDM rubber membrane. EPDM is increasingly popular because it is laid in a single sheet with fewer joins, which reduces the number of points where water can penetrate. A competent roofer should be able to advise which system is appropriate for the size of the area, the drainage arrangement and the access available for maintenance.
A full new roof on a standard three-bedroom semi-detached house typically costs between £5,500 and £10,000 depending on the tile specification, the roof complexity (dormers, chimneys and valleys all add to the cost), whether scaffolding is already in place and what condition the timber deck and rafters are in. Larger detached houses with complex roof lines can run considerably higher. These are broad figures: your written quote is the only reliable number for your specific property.
Do not select a contractor purely because their price is the lowest. If one quote is significantly cheaper than two others covering the same specification, find out where the saving is coming from before you agree.
We install new roofs in Christchurch and across the surrounding area, including Southery, Walpole, West Walton, Shouldham, Shouldham Thorpe, Stoke Ferry and beyond. Call us to arrange a roof survey and a written, itemised quote so you can make a clear comparison before deciding.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.