Whether you have a handful of slipped tiles or a flat roof that has started letting water in, Downham Market Roofers carries out all types of roof repairs in Marham and the surrounding villages.
Call any time. Calls are answered day and night and passed straight to our roofers.
A roof repair is any work that fixes a fault without replacing the whole roof covering. That covers everything from re-bedding a loose ridge tile and replacing a cracked slate to cutting out a failed section of felt on a flat roof and re-sealing the flashing around a chimney. The aim is to stop water getting in, restore the weatherproof layer, and extend the roof's working life without the cost of a full strip and re-cover.
Repairs are appropriate when the underlying structure is sound and the damage is localised. A full replacement becomes the better answer when the covering has deteriorated across most of its area, when the roof boards beneath are rotten, or when repeated small repairs are costing more than a re-cover would over a three- or four-year period.
Individual tiles and slates come loose when the nibs that hook them to the batten break with age, or when the fixing nails corrode. A single gap is enough to let driven rain into the roof void. Replacing like-for-like is usually straightforward, though matching older natural slates or handmade clay tiles takes a little more care and sourcing.
Felt flat roofs are the most common source of leak calls on extensions, garages and outbuildings. Felt deteriorates through a combination of UV exposure, temperature cycling and water lying on the surface. The failure modes are predictable:
Lead or aluminium flashing seals the joint between a roof covering and a wall, chimney or abutment. It is one of the first places to check when a leak appears inside because the flashing itself can lift, crack or pull away from the mortar that holds it in the chase above. Re-pointing the chase and re-dressing the flashing is far cheaper than the internal damage a persistent leak causes.
Flat roof rooflights leak at the kerb - the upstand the glazing unit sits on - when the sealant or the upstand felt ages. The leak often tracks sideways inside the roof structure before it shows as a drip, so the wet patch on the ceiling is not always directly beneath the source.
Any pipe or vent that passes through a flat or pitched roof needs a weathered collar or lead soaker around it. These degrade and pull away from the pipe over time. Replacing the collar and re-bedding it in sealant is a quick repair but one that is often overlooked until a stain appears on the ceiling below.
Flat roofs are designed to shed water, not hold it. A well-laid flat roof should have a minimum fall of around 1 in 80 so that water drains to the outlet. Where the fall is inadequate or the outlet is blocked, water ponds and accelerates felt deterioration significantly. Ponding is a warning sign - it does not cause an immediate leak but it shortens the life of the covering and adds load to the roof structure. Clearing the outlet is the first step; if the fall is genuinely wrong, that is a structural correction rather than a surface repair.
This is the question that matters most to a homeowner facing a flat roof leak, so it is worth being direct about it. A repair is the right call when the felt is broadly in good condition, the damage is in one or two defined areas, and the roof boards beneath are dry and structurally sound. If you lift a corner of the felt and the boards beneath are soft, discoloured or showing rot, replacement is unavoidable - re-felting over rotten boards is money wasted.
Age is a guide but not a rule. A mineral-felt flat roof has a typical lifespan of around 10 to 15 years; a torch-on felt system can last 20 years or more with reasonable maintenance. If a roof is near the end of that range and has already had one or two repairs, re-covering usually works out cheaper in the long run than paying for another repair in two years' time.
EPDM rubber is an alternative to traditional felt on flat roofs and is worth considering when a full re-cover is on the table. It is a single-piece membrane with fewer seams, which removes one of the main failure points of multi-layer felt.
A straightforward, honest survey of the roof surface and the boards beneath will tell you which way to go. Ask any roofer you contact to explain their findings before they quote, and to tell you specifically whether the boards need replacing and why.
The wet patch inside the building is rarely directly below the entry point. Water travels along roof boards or ceiling joists before it drips through, sometimes by a metre or more. The entry point is almost always at a detail - a seam, a lap, a flashing, an upstand, a rooflight kerb or a pipe collar - rather than in the middle of a flat sheet of felt. Start by checking all of those details before assuming the main field of felt has failed.
In dry weather you can often spot the problem from above: look for open seams, blisters that have split, lifted edges and any area where the surface granules have worn away to expose bare bitumen beneath. Standing on the roof to do this is risky on older felt that may have lost its structural integrity - if in doubt, keep your weight off it and have a roofer do the inspection.
Wet weather makes finding the source harder because water can be running under the felt surface and tracking along a joist. In genuinely urgent situations - a heavy leak after storm damage - a temporary repair using roofing tape or a self-adhesive patch over the most obvious breach is better than leaving it open, but it is a stop-gap, not a fix. A proper repair in dry conditions gives the materials time to bond correctly.
Torch-on felt and cold-applied repair products both need the substrate to be dry and reasonably warm to bond properly. Working in rain is not practical for any permanent repair. A skilled roofer will assess conditions and may apply a temporary cover or sealant to stop active ingress, then return to carry out the permanent repair when conditions allow. Be wary of any quote that commits to a permanent felt repair in driving rain - the bond will be poor and the repair is likely to fail within months.
This is the section most homeowners want answered honestly, so here are realistic UK ranges and the factors that push costs up or down. These are typical figures, not quotations - every roof is different and a price can only be confirmed once the roof has been inspected.
Before agreeing any repair, it is worth asking the roofer a few direct questions. These are not awkward questions - any roofer who knows their trade will answer them without hesitation.
Getting clear answers before work starts avoids disputes afterwards. A written quote that specifies the work to be done, the materials to be used and what is not included is the standard you should expect.
As well as Marham, we carry out roof repairs across Downham Market and the surrounding villages.
If you are not sure whether your roof needs a repair or a full replacement, call us and describe what you are seeing - a stain on the ceiling, a tile that has slipped, water tracking down a wall after rain. We can usually give you an honest steer over the phone and arrange a roof survey to confirm the scope before any work is quoted.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.