If your roof is leaking or tiles have slipped, Downham Market Roofers carries out all types of roof repairs in Southery and the surrounding area - with honest advice on whether a repair will genuinely fix the problem.
Call any time. Calls are answered day and night and passed straight to our roofers.
A roof repair sounds simple enough, but the quality of the outcome depends almost entirely on what happens between your first call and the moment we pack up and leave. Cutting corners at any stage - rushed diagnosis, cheap materials, no attention to the finish - means the same problem comes back within a season or two. Below, we walk through every stage of a proper roof repair so you know exactly what to expect and what to ask for.
Before any work starts, someone needs to get up on the roof and look properly. A good inspection covers the full roof surface, not just the area directly above where the water came through inside. Leaks travel. Water can enter at a cracked ridge tile or a failed flashing and appear on your ceiling three metres away from the actual source.
On a pitched roof we check the condition of every visible tile or slate, the ridge, hips and valleys, all flashings, the gutters and fascias, and the condition of any mortar work. On a flat roof - whether traditional felt or an EPDM rubber system - we look for splits, blisters, failed seams, ponding areas, and the condition of the upstands and any rooflights or pipe penetrations.
A common problem is that homeowners call because of an obvious drip, and the repair only addresses that one visible point. A thorough first inspection should identify every weak area so you are not paying for a second call-out in six months. Ask any roofer what they found and why they are recommending the specific repair they propose.
Not every roof problem needs a full replacement, and not every problem can be fixed with a patch. Knowing the difference is what separates useful advice from a sales pitch.
For pitched roofs with missing or slipped tiles, a repair is almost always the right answer if the underlying structure and felt underlay are sound. Replacing a handful of concrete or clay plain tiles, or a section of natural slate, costs a fraction of a new roof and solves the problem completely when done properly.
For felt flat roofs, the decision is more nuanced. A single split or a failed seam around a pipe can often be repaired effectively. Widespread blistering, multiple failed seams, or felt that has become brittle and cracked across a large area generally means the felt has reached the end of its serviceable life. In that situation a repair is likely to be temporary at best, and a full re-felt is the honest recommendation. Traditional built-up felt can last 10 to 20 years depending on specification, but on older properties it is not unusual to find felt that has been patched several times already.
EPDM rubber membranes are more resilient and can often be repaired with compatible adhesive and patch materials even when the damage looks significant, provided the insulation and deck beneath are not water-damaged. If the roof deck - usually the timber boards or plywood beneath the membrane - has rotted through, those boards need replacing before any surface membrane work will hold.
The right materials make a repair last. For slipped or broken concrete interlocking tiles, we use matching replacement tiles where possible. On older properties, matching tiles can be hard to find - sourcing reclaimed matching tiles takes a little more effort but it is worth it for a result that does not look out of place.
For natural slate roofs, the source quarry matters. Welsh slate and Spanish slate behave differently and age differently. A repair using the wrong slate thickness or a mismatched fixing method will not last as long as it should.
On felt flat roofs, patch repairs should use materials compatible with the existing felt. Torch-on felt patches applied over standard felt, or incompatible sealants used as a quick fix, can fail quickly or trap moisture. A proper repair uses the correct grade of felt, bonded or torched correctly and taken past the damage by a meaningful margin.
Before any felt repair begins, the surface needs to be clean, dry and sound enough to hold a bond. Working on a wet roof surface is not advisable for felt repairs - the bond will not form properly and you are wasting materials. For emergency situations where the roof cannot be left open, a temporary cover or waterproof repair strip can buy time until conditions allow proper work.
Felt becomes brittle over time as the oils that keep it flexible evaporate. Splits often appear first at the edges of the roof or around penetrations. A clean split in otherwise sound felt can be repaired with a correctly bonded patch, provided the deck beneath is dry and solid.
Blisters form when air or moisture becomes trapped between layers of felt during installation, or as the felt ages and delaminates. A blister that has not broken is not necessarily leaking yet, but it weakens the surface. Once a blister splits it will let water in. Small blisters can be cut, dried out and patched; widespread blistering across a large area is a sign that the membrane has failed overall.
Felt is laid in overlapping strips, and those laps need to be properly bonded. Where the bond fails, water tracks under the felt at the seam. Failed laps are one of the most common sources of flat roof leaks and are often straightforward to repair if caught early.
Where the felt turns up at a wall or parapet - the upstand - it needs to be fixed securely and covered by a metal flashing or a chase in the mortar. If the felt edge lifts away, water runs straight down behind it. Reattaching and properly counter-flashing the upstand is a standard repair.
Lead flashings at chimney stacks, parapet walls, and where a flat roof meets a house wall are a common failure point on properties of all ages. Lead can crack, lift or pull out of the mortar joint it sits in. Re-dressing existing lead or replacing a section of flashing is usually a half-day job and significantly cheaper than leaving it until water has damaged the structure below.
The joint between a rooflight frame and the surrounding membrane is under constant stress from thermal movement. Sealant used here can harden and crack within a few years. Leaks around rooflights are sometimes misdiagnosed as condensation or frame failure when the actual problem is at the upstand detail where the membrane meets the kerb.
Every penetration through a flat roof is a potential leak point. Pipe collars and lead soakers around flues need to be correctly formed and kept clear of debris. Where these details have been poorly installed or have deteriorated, a targeted repair around the penetration alone is often all that is needed.
Flat roofs should never be completely flat - a minimum fall of 1:80 is needed to drain water away. Ponding water sits on the surface, accelerates felt deterioration, and adds significant weight. If a roof has no fall built in, a repair to the membrane alone will not solve the problem long-term. Improving drainage or building up a fall with tapered insulation boards during a re-felt is the proper fix. Standing water on a felt roof is a problem: it does not just leak, it shortens the life of the whole membrane.
For pitched roof tile or slate repairs, the work sequence is: remove any broken or slipped tiles carefully to avoid damaging sound ones nearby, inspect the battens and underlay underneath, replace any damaged batten sections, relay tiles using correct nailing or clipping, and check the repair area sits correctly with the surrounding roof so there are no lifted edges for wind to catch.
Mortar repairs - repointing a ridge, re-bedding a hip or repointing around a chimney stack - should use a mortar mix suited to roofing work. Some older properties have lime mortar bedding, and replacing it with a hard cement mix can cause problems as the two materials move at different rates. Where ridge or hip tiles are being re-bedded, check the condition of any lead soakers or saddle flashings at the same time.
For flat roof felt repairs, the process is: clear the surface of debris, identify and mark the full extent of the damage, cut the felt back to sound material if needed, dry the area, apply the patch or new felt with the correct bonding method, dress the edges properly and check all surrounding laps and upstands while you are there.
Before packing up, a proper check of the repair from ground level and, where possible, from a ladder is worth doing. On a pitched roof, look at the lines of the tiles - if a repair section sits proud or hollow compared with the surrounding roof, something is not right. On a flat roof, look at the edges of any patch for lifted corners and check that upstands are still correctly dressed against the wall.
If the leak that prompted the call-out is accessible from inside the loft, a check of the underside of the repair area for daylight or damp is a sensible final step. Not every roofer does this, but it is worth asking.
Roof repair work produces broken tile fragments, old felt offcuts, mortar debris and nails. A tidy site at the end of the job is not optional. Debris left on a roof or in gutters will block drainage and cause problems of its own. Nails left on a drive or path are a safety issue. All waste materials should be cleared and taken away, and gutters in the area of the work should be checked and cleared before leaving.
Costs vary depending on what needs doing, how accessible the roof is, and the materials involved. As a general guide for the area around Southery and nearby towns including Downham Market:
These are typical current UK ranges and will vary with site conditions. Any quote should itemise materials and labour separately so you can see what you are paying for.
Yes, in many cases. A clean split in otherwise sound felt can be repaired with a correctly bonded patch using compatible materials. If the split is part of widespread cracking across the whole surface, or the deck beneath is water-damaged, a repair is unlikely to be a lasting solution and a full re-felt is the better option.
Small blisters that have not broken can be cut open, the area dried out and patched. Once a blister splits it allows water ingress. Widespread blistering across most of the roof surface is a sign the felt has aged beyond reliable repair.
Yes. Ponding water accelerates felt deterioration, adds structural load, and will eventually find a way through. If the cause is insufficient fall, improving drainage is the only permanent solution - re-felting alone will not stop water from pooling in the same place.
Properly, no. Felt repairs require a dry, clean surface for the bond to form correctly. In an emergency, a temporary waterproof strip or cover can be applied to protect the roof until conditions allow proper work. Attempting a bonded felt repair in wet conditions usually results in early failure.
If the damage is localised and the surrounding felt is still in reasonable condition, a repair is worth doing. If the felt is brittle, cracking in multiple places, or has been repaired several times already, re-felting is the more cost-effective choice over the next few years. A good roofer will tell you honestly which situation applies.
It should. If rotten or delaminated boards are found during a flat roof repair, those need to come out and be replaced before any new membrane is laid. A membrane on a failed deck will not last. Ask the roofer to specify in their quote how they will handle any damaged decking they find.
Start from inside. A water stain on a ceiling below a flat roof often appears some distance from the actual entry point. In the loft space or void, look for damp or staining on the underside of the roof deck and trace it back towards the highest point. Common entry points are around pipe penetrations, at upstands and wall junctions, at rooflights, and at failed seams. The only way to be certain is a proper inspection from the roof surface itself.
Downham Market Roofers covers Southery and the surrounding area, including nearby towns such as Downham Market, and villages across this part of west Norfolk and into neighbouring parts of Cambridgeshire. Whether you are dealing with a leaking felt roof, a handful of slipped slates, failed flashings or a more complex repair, get in touch and we will give you a straight assessment of what needs doing.
When you ask for a roof survey, look for a clear, itemised quote - avoid vague estimates, and expect a proper look at your roof and honest advice on your options.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.